Skip to content
CalamityCorners Locksmith Co.Open 24/7 (226) 271-6061
Two brass house keys on a ring resting on a workshop counter. — Spare Car Key Duplication, London

Car keys · London

Spare Car Key Duplication

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up. One worn blade on a single ring is now the entire access system for the vehicle.

In plain words

Most vehicles on the road pair a cut metal blade with an invisible electronic layer, a chip in the head that the immobilizer checks before the engine is allowed to start. Duplicating a spare means reproducing both halves, not just the shape of the blade, so the process depends on what year and system the car actually uses. An older mechanical key copies directly from the blade on a duplicating machine. Transponder and remote-head keys add a chip that is copied or freshly coded through the vehicle's diagnostic connection. Proximity fobs add pairing over radio, and every path ends with a second key that starts the car.

Sound familiar?London

The call
The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up. One worn blade on a single ring is now the entire access system for the vehicle.

NextHow the visit goes

Spare Car Key Duplication · London

How the visit goes

Illustrative locksmith scene
  1. Scene 1

    Confirming who the vehicle belongs to

    Before a blank is cut or a chip is touched, the locksmith establishes who is asking and their authorization for the vehicle: a piece of photo identification alongside registration matching a name and address, or another document connecting that person to the car. A rental, a company vehicle or a car still financed through a lender may need an extra document confirming who is authorized to hold a key to it. This check is made at every visit rather than assumed from an earlier one, since who owns or is authorized to use a vehicle can change between one spare and the next.

  2. Scene 2

    Working from a used or single-key vehicle

    When only one key exists for the vehicle, the whole process leans on that single copy: its blade is traced or measured, its chip is read where the system permits it, and every remote function it performs is noted before work starts, since there is nothing else to check against. The new key is built to match, then tested on its own, away from the original, to confirm it genuinely operates independently rather than only appearing to work while the first key happens to be nearby with its own signal still in range.

  3. Scene 3

    Where the spare should live

    A spare that stays inside the vehicle solves little if the vehicle itself is what gets locked or lost, so the sensible places are a bag that travels separately, a drawer at home, or with a family member who is easy to reach. A passive proximity spare benefits from a signal-blocking pouch when it is stored, since that kind of fob keeps broadcasting even while it sits untouched in a drawer; a standard button-operated remote works differently and does not need the same pouch. Wherever it ends up, the location is worth sharing with at least one other person in the household so the spare is findable by someone other than the person who put it away.

In the van

  • Proximity fob shell
  • Code-cutting machine
  • Key gauge and calipers
  • Key duplicating machine
  • VIN and key-system reference

What shapes the quoteCalamity Corners Locksmith Co.

Authorization documentation
A vehicle registered to a business, financed through a lender, or owned by a family member sometimes needs an extra document confirming who may hold a key, which is sorted out before work begins.
Sourcing the blank or shell
Common platforms use blanks kept in regular stock, while a less common model or an unusual shell sometimes has to be sourced specifically for that vehicle before work can begin.
Which key system the vehicle uses
A plain mechanical blade, a transponder key, a remote-head key and a proximity fob each call for different tools and different amounts of time, so identifying the system early shapes the whole quote before any cutting or programming starts.

FeesSame any hour

Have it ready

Before you call · 0 / 3

(226) 271-6061

Let's clear a few things up

How long does making a spare car key usually take?

The time depends mainly on the key system rather than the blade. A plain mechanical key can often be duplicated within one visit, without extra electronic work. A transponder or remote-head key adds a cloning or programming step, done off the vehicle when the chip supports it and through the vehicle's own diagnostic port when it does not, with the diagnostic route usually taking longer. The locksmith can usually say which category your vehicle falls into once the make, model and year are known, before the appointment starts.

Is it possible to leave out certain functions on the spare, like remote start?

Yes. A spare can be built to do everything the first key does, or scaled back to just the blade and chip that unlock a door and start the engine, without a remote start button or a trunk release. This is agreed before programming begins and is a deliberate choice rather than a lesser copy, useful for a valet, a young driver, or anyone the household wants kept to essential access.

Can a spare be made from a key that is already worn?

Yes, and it is often a good reason to make one. Rather than tracing every rounded edge of a worn blade onto the new copy, the locksmith can decode the lock or cut to a valid factory code for the blade, then read or clone the chip data separately for the electronics, producing a spare that is cleaner than the original rather than a copy of its wear. The worn key can then be compared against the fresh one and retired if it is due for that.

Londoninformation

MiddlesexOntario

Town
London, Middlesex
In business
27 years
Hours
Open 24/7
Nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

2021 census: what it means at the door

Every square is one home in a hundred.

  • 52 in 100 homes · older homes
  • About 52% of homes in London were built in 1980 or earlier, according to the 2021 Census.Where most homes were built decades ago, doors often still carry their original mortise locks and brass knobs. That hardware can usually be cleaned, re-sprung and kept in service, with a modern deadbolt added above it for strength without losing the look.
  • Single-detached houses make up about 49% of homes in London (2021 Census).Where the housing is mixed, expectations about what can be changed differ. A homeowner in a house decides everything; a condo owner works within house rules on the outer face. The locksmith knows which conversation to have at which door.

Source: Statistics Canada, Census Profile

Open London in Google Maps

On-site assessment

Request a visit.

The paperwork for the used car changed hands last week, and the previous owner mentioned, almost as an afterthought, that a second key never turned up.

(226) 271-6061, open 24/7.