Sound familiar?Northcrest
- The call
- The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.
The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made. A lock with codes you can set and erase from your phone would end that cycle.
In plain words
Smart lock installation puts an electronic deadbolt or lever on your door that opens with a code, a phone, a fob or a fingerprint, and, on some models, a conventional key too. The locksmith confirms you control the property, measures the door and its holes, and makes sure the bolt travels freely, because a battery motor has less strength than a hand. The hardware is fitted with a solid strike, the maker's specified batteries go in, and the lock is set up under your own account. You leave with codes working and, on a keyed model, the override key tested and the old key retired.
Smart Lock Installation · Northcrest
How the visit goes
Scene 1
Taking stock of an existing electronic lock
When a keypad or app lock is already on the door, the assessment is about what it knows and who it answers to. The locksmith notes the model, checks whether the keypad, motor and battery contacts are healthy, and asks whether anyone holds the administrator account, the master code or the override key. A lock the previous owner still controls from an app is not yours yet, however new it looks. If the hardware is sound, a factory reset and a fresh enrolment may be all that is needed; if the motor labours or the keypad has worn digits, replacing it is the better path. Either way the door alignment gets the same scrutiny as for a new install.
Scene 2
Preparing the door before the lock
Good installations start with corrections, not with the new box. If the bolt was dragging, the locksmith tightens or replaces hinge screws with longer ones that reach the framing, shims a hinge to lift a dropped door, and dresses the strike pocket so the bolt has room to seat fully. Weatherstrip that pushes the door out of square is trimmed or repositioned. If the existing holes are undersized for the new lock, they are enlarged with a hole saw and a jig so they stay centred; if a mortise pocket from an old lock is in the way, it is filled and re-drilled. The door is then closed and the bolt tested by hand before any electronics are unpacked.
Scene 3
A cleaner handover at the next turnover
For a rental or a shared home, the real payoff arrives at the next change of occupant. Instead of collecting keys and wondering about copies, you delete the departing tenant's code, add one for the incoming tenant and confirm the change in the app. The small register the locksmith helped you start shows who still has access and which codes are due to expire. Any guest, cleaner or contractor codes that belong to the old arrangement go at the same time. The override key stays under your control and is handed over or rekeyed as the tenancy rules and your own preference require, so the door changes hands with nothing left behind.
In the van
- Mechanical override cylinder and repinning kit
- Wi-Fi bridge or home hub
- Reinforced box strike with long screws
- Thick-door extension kit
- Hand screwdrivers, Phillips and Torx
What shapes the quoteCalamity Corners Locksmith Co.
- Number of doors
- A single front door is the base case. Adding the back door, the garage entry or a side door, whether each gets its own smart lock or is rekeyed to match the override key, extends the visit accordingly.
- Pairing a smart deadbolt with a smart lever on the same door
- Some doors get a smart deadbolt only, while others pair it with a smart lever below so both turn from one app and share the same codes. Fitting and programming two devices on one door takes more work than one, confirmed once the door and hardware are seen.
- Number of users and codes to program
- Setting up two codes for a couple is different from configuring a household of six plus a cleaner's schedule and a landlord's master. The count of codes and schedules is a fair part of the labour.
FeesSame any hour
Let's clear a few things up
Fingerprint, fob, code or phone: which is worth having?
It depends on who uses the door. Codes suit everyone and need nothing in hand. Fobs or cards are a favourite for children and for anyone who finds small buttons difficult, since a tap does it. Fingerprint readers are convenient for a household of adults but can be fussy with cold, wet or gloved hands in winter, so pair them with a code. Phone control is for whoever wants alerts and remote checks. Most families end up using two of these.
Will a smart lock fit my existing door?
Most residential doors have the standard preparation these locks are designed around: a large hole for the lock body, a smaller one in the edge for the bolt, and a thickness between roughly 35 and 45 millimetres. The locksmith measures all three plus the backset before recommending a model. Thicker doors take an extension kit, thin or glass-panelled doors and older doors with a mortise pocket call for a particular model or some preparation, and all of that is sorted out before the box is opened.
Will the new lock match my existing door hardware?
Smart locks come in the same finish families as ordinary hardware: satin nickel, matte black, aged bronze, polished brass and chrome. The locksmith matches the finish to your handle set, or swaps the handle at the same time so the door reads as one piece. Where an old finish has weathered to a shade no new part will match, replacing the knob or lever alongside the deadbolt is the tidy answer, and the two are often sold as a matching pair.
Change or Rekey Locks
- Deadbolt InstallationThe front door has a handsome lever and a keyed knob, and that is all.
- Lock Replacement & UpgradeSomeone tried the back door while you were away.
- Vintage Mortise Lock ServiceThe brass knob on the front door of your century home turns, but nothing happens on the other side.
- Gate & Building Entry LocksSomeone pried at the gate latch overnight, and now the strike plate hangs by one screw and the cylinder spins loose in its…
- Mailbox Lock ReplacementThe mailbox key snapped clean off in the lock last week, and the stub is still sitting somewhere inside the cylinder.
Northcrestinformation
MiddlesexOntario
Smart Lock Installation · London, Lucan Biddulph, Middlesex Centre, Broughdale, Calamity Corners, Masonville, Orchard Park, Sherwood Forest, Stoneybrook, University Heights, White Hills
- Town
- Northcrest, Middlesex
- In business
- 27 years
- Hours
- Open 24/7
- Nights, weekends and holidays, same fees
- Phone
- (226) 271-6061
- Visits
- On-site assessment preferred. Request a visit or call.
2021 census: what it means at the door
Every square is one home in a hundred.
- 52 in 100 homes · older homes
- 49 in 100 homes · mixed housing
- About 52% of homes in London were built in 1980 or earlier, according to the 2021 Census.Decades of seasons move a frame, and an older house often has a front door that locks easily in summer and fights in winter. Setting the strike with the seasons in mind, and choosing a lubricant that stays fluid in the cold, keeps it working year round.
- Single-detached houses make up about 49% of homes in London (2021 Census).Where housing types are mixed, the same lost-key call means different things. In a house, rekey every door on the property. In an apartment, rekey the suite door and check with management about the common entrance. The locksmith asks which it is first.
Nearby
On-site assessment
Request a visit.
The rental turns over every few months and each time you drive across town to swap keys, then wonder whether copies were made.
(226) 271-6061, open 24/7.